Canada's first dedicated distributor
of Surface Mount Technology

    
 

 
      


 
exact begins contains  
   
 
 
 

Utech Electronics - Supplier News


ABOUT UTECH
 
  ISO 9001:2008
  Supplier News
  RoHS
  Manufacturers
  Credit App (PDF)
 


Utech Electronics - Press Release

Stackpole Update - STACKPOLE'S FUSIBLE RESISTOR SOLUTIONS FOR SMOKE DETECTOR APPLICATIONS

Stackpole  

RALEIGH, NC (February 8, 2010) - Stackpole Electronics, Inc. has two resistor series designed for smoke detector applications. These applications require resistors with various levels of surge handling and the conflicting requirement of fusing or failing without collateral damage. For less robust applications, such as those that do not have to withstand high voltage short duration pulses, there is the economical FRN Series. The FRN Series is a fusible version of the popular RN Series axial leaded, metal film resistor and is designed to open very quickly and predictably under continuous overloads. Guaranteed fusing time is less than 30 seconds under power magnification levels ranging from 12 times to 25 times rated power, depending on resistance value. Typical fusing times are normally 10 seconds. This fusing characteristic is maintained by careful control of the film materials and manufacturing processes, including the trimming process during calibration.

The WWF Series is a fusible wirewound resistor type. The standard WWF Series can withstand several hundred surges of several thousand volts reliably and with very little resistance shift, yet will open in less than 10 seconds when subjected to overloads of 25 to 50 times rated power.

However, by changing core sizes, resistance wire alloys and diameters, and passivation materials, Stackpole can tailor the resistor behavior to fit a wide variety of application and design requirements. For higher level smoke detector applications, the fusible resistor used must survive more than 400 surges of 6KV, yet it must fuse very quickly such that the amount of heat produced prior to fusing is kept to a minimum. The combination of these two requirements can also be seen in the white goods industry. Even though it is very difficult to comply with both requirements, the WWF Series from Stackpole is capable of providing a consistent and reliably fusing characteristic. Stackpole is currently developing a version of the WWF Series that will be recognized under UL 1412 and can also offer fusing wirewounds in a surface mount package.

The FRN Series is available bulk, ammo, and tape and reel packaging.

Pricing varies with size and resistance value and ranges from around $0.02 each to $0.05 each in full reel quantities.

The WWF Series is available in tape and reel packaging. Pricing can vary greatly with size, resistance value, tolerance, and device characteristics, but typically ranges from $0.15 each to $0.50 each in full reel quantities.

Contact Stackpole for volume pricing.

For more information about Stackpole products, contact us at:

Stackpole Electronics, Inc.
2700 Wycliff Road Suite 410,
Raleigh NC 27607
phone: 919-850-9500
email: marketing@seielect.com
web: www.seielect.com.

Stackpole Electronics Inc. is a leading global manufacturer of resistors supplying to the worlds largest OEMs, contract manufacturers and distributors. Headquartered in Raleigh, N.C., the privately held company began manufacturing in 1928 as part of Stackpole Carbon Company in St. Mary's, Pennsylvania. Now affiliated with Akahane Electronics, Stackpole has manufacturing facilities in Japan, Taiwan, China and Mexico; warehousing facilities in El Paso, Hong Kong and Japan; and sales offices in Tokyo, Hong Kong and Taiwan.

 

 



About Utech Electronics | Contact Us | Manufacturers | Privacy Policy | Terms and Conditions
Utech Electronics 2017