June 1, 2012 - SAL now with screw termination
M8x1 Connectors field attachable
CONEC has recently added connectors with screw termination to the M8x1 field–attachable connector series. The new version is suitable to terminate stranded or solid wires up to across section of 0,5 mm² by the new screw termination. This new termination allows also the connection of stranded wires incl. sleeve without reduction of the maximum allowed cross section. A corresponding key for the hexagon socket screws are supplied along with each connector.
The versions of field-attachable connectors are available as plug- and socket with 3- or 4- poles. Additional to the straight version CONEC also offers a 90° angled version. The housings accept standard cables with 4 to 5,5mm diameter.
The current carrying capacity of every contact is 4A with all contacts under load and 40°C ambient temperature condition. The operating temperature range is from -30°C to 85°C. The coupling rings are hexagonal shaped (SW13)and if necessary, a corresponding torque wrench is available from CONEC. The connectors are IP67 protected when fully mated.
For further questions please contact our sales team.
125 Sun Pac Blvd.
Brampton, ON L6S 5Z6 CANADA
Tel.: 905 790-2200 • Fax.: 905 790-2201
firstname.lastname@example.org • www.conec.com